TJW58FM

DC Worm Gear Motor直流蜗轮蜗杆电机																2.5 Nm		10 Watts
RS395 Micro brushed dc motor with worm gearbox																For combination with
																Hall sensor encoder
																可搭配磁性编码器
TJW58FM Series
Dimensional drawing 外形尺寸图(mm)
Picture of motor 电机实物图
Motor characteristics 电机特性
Housing material 安装面材质															Zinc alloy 锌合金
Gear chain material 齿轮材质															Powder metallurgy 粉末冶金
Back lash 齿轮背隙															≤2°
Bearings on output shaft 输出轴轴承															Ball bearing 滚珠轴承
Recommended max input speed 建议最大输入转速															≤12000RPM
Radial force 径向力															≤3kgf
Axial force 轴向力															≤5kgf
Maximum pressure force on shaft 主轴最大承受压入力															≤15kgf
Radial clearance 径向间隙															≤0.1mm
Axial clearance 轴向间隙															≤0.3mm
Operating temperature range 使用温度范围															-20℃-120℃
Commutator 换向结构															Brushed
Direction of rotation 旋转方向															CW / CCW
Noise 噪音															≤60dB
DC Motor Technical Data 直流电机参数
Values at 25-30℃ 室温下测量数值
Model 型号	Rated Voltage（V） 额定电压	No-Load 空载参数		Rated 额定参数					Stall 堵转参数		*Tips: The datasheet on left side are limited, please consult our staffs for more parameter information. 提示：左边的数据表参数有限，请联系客服获取更多参数信息。
		Speed 转速	Current 电流	Speed 转速	Current 电流	Torque 力矩	Output 输出功	Eff 效率	Torque 力矩	Current 电流
		rpm	mA	rpm	A	mN.m	W	%	mN.m	A
RS395	12	7500	160	6000	0.62	7.30	4.59	62.15	21.90	4.50
RS395	24	5000	48	4000	0.20	7.10	2.97	62.90	21.30	1.50
Motor With Gearbox Technical Data 减速电机参数
Gearbox data 减速箱参数
Gear ratio 减速比 n : 1			27	50	79	93	122	167	213	263	311	407	556	710
Number of gear stages 减速级数			3	3	3	3	3	3	3	4	4	4	4	4
Gearbox size 齿轮箱尺寸(mm)			58*40	58*40	58*40	58*40	58*40	58*40	58*40	58*40	58*40	58*40	58*40	58*40
Efficiency 效率(%)			0.61	0.61	0.61	0.61	0.61	0.61	0.61	0.52	0.52	0.52	0.52	0.52
RS395-12V-7500R
No-load speed 空载转速(RPM)			277.8	150.0	94.9	80.6	61.5	44.9	35.2	28.5	24.1	18.4	13.5	10.6
Rated speed 额定转速(RPM)			222.2	120.0	75.9	64.5	49.2	35.9	28.2	22.8	19.3	14.7	10.8	8.5
Rated torque 额定扭矩(N.M)			0.121	0.224	0.354	0.417	0.547	0.749	0.955	1.002	1.185	1.551	2.119	2.500
Rated torque 额定扭矩(KG.CM)			1.19	2.20	3.47	4.09	5.36	7.34	9.36	9.82	11.61	15.20	20.76	24.50
Rated torque 额定扭矩(LB.IN)			1.37	2.53	4.00	4.71	6.18	8.45	10.78	11.32	13.38	17.51	23.92	28.23
RS395-24V-5000R
No-load speed 空载转速(RPM)			185.2	100.0	63.3	53.8	41.0	29.9	23.5	19.0	16.1	12.3	9.0	7.0
Rated speed 额定转速(RPM)			148.1	80.0	50.6	43.0	32.8	24.0	18.8	15.2	12.9	9.8	7.2	5.6
Rated torque 额定扭矩(N.M)			0.118	0.218	0.344	0.406	0.532	0.728	0.929	0.975	1.153	1.508	2.061	2.500
Rated torque 额定扭矩(KG.CM)			1.15	2.14	3.38	3.97	5.21	7.14	9.10	9.55	11.30	14.78	20.19	24.50
Rated torque 额定扭矩(LB.IN)			1.33	2.46	3.89	4.58	6.01	8.22	10.49	11.01	13.01	17.03	23.27	28.23
Gear motor curve case 减速电机曲线示例
Project 工程名:			DC GEAR MOTOR			Date 日期:			2025/3/26			Performance (in an ambient temperature of 25-30℃)
Motor speed转速:			5000RPM		Full scale 量程:				100%		Eff	Rapidly test to prevent temperature rise and overload damage.
Gear chain 级数:			4						5.0		Watts	Constant voltage 恒压加载:					24		Volts
Gear ratio 减速比:			311						5.0		Amp.	Direction 方向:					CW/CCW
												At no-load 空载参数
															Speed 转速:			16.0		RPM
															Current电流:			0.05		AMPS
												Max instantaneous parameters 最大瞬时参数
															Torque 扭矩 :			8443.75		mN-m
															Current 电流:			1.01		AMPS
												At maximum efficiency 最高效率点参数
															Efficiency 效率 :			40.1		%
															Torque 扭矩 :			1539.3		mN-m
															Speed 转速 :			13.1		RPM
															Current 电流:			0.22		AMPS
															Output 输出功率:			2.12		Watts
												At maximum power output 最大功率输出参数
															Output 输出功率 :			3.599		Watts
															Torque 扭矩 :			4296.5		mN-m
															Speed 转速 :			8.0		RPM
															Current 电流 :			0.53		AMPS
Production Combination 其他配件
Accessories 名称					Voltage 电压			Resolution 分辨率					Channels 通道数						Remark
Magnetic Encoder 磁性编码器					5V-24V			12ppr					A&B

High-Torque Worm Gear Motor | TJW58FM | Enhanced Output for Demanding Loads

Features

1. 58mm center distance, reinforced internal structure for higher torque capacity

2. Output torque range: 3–5Nm, reduction ratio 7.5:1 to 100:1

3. Upgraded bearing system for improved radial load capacity

4. Available with permanent magnet DC motor or brushless DC motor

Description

TJW58FM is an upgraded version of the 58mm series worm gear motor, featuring reinforced internal bearings and a strengthened output shaft for higher torque capacity. Output torque ranges from 3Nm to 5Nm, making it suitable for more demanding applications than the standard TJW58FG. The worm gear set uses precision-ground worms and high-density bronze worm wheels for improved efficiency and longer service life. Reduction ratios from 7.5:1 to 100:1 are available. Self-locking is effective at ratios ≥30:1. We provide optional motors such as high-power brushed DC motors, sensorless brushless DC motors,

Wide range of configurations:

Center distance 58mm, reduction ratio 7.5–100:1, output torque 3–5Nm, input power up to 25W, reinforced output bearing.

Applications

- Electric wheelchairs and mobility scooters

- Heavy-duty automatic doors (industrial)

- Conveyor belt drives

- Lifting mechanisms for industrial equipment

- Automatic tire changing machines

- Bank teller machines (ATM)

Advantages of TJW58FM Worm Gear Motor

1. Higher torque capacity: Up to 5Nm in same 58mm footprint.

2. Reinforced bearings: Handles higher radial and axial loads.

3. Longer service life: Premium materials for wear resistance.

4. Thermal protection option: Prevents overheating in continuous duty.