Modified self lock micro worm gear box 12v dc worm gear motor 24v 40rpm 50 rpm 2 watt 3w 4w 5kg dc worm gear motor encoder
| DC Worm Gear Motor直流蜗轮蜗杆电机 | 1 Nm | 2 Watts | |||||||||||||||||||
| RF370 Micro brushed dc motor with worm gearbox | For combination with | ||||||||||||||||||||
| Hall sensor encoder | |||||||||||||||||||||
| 可搭配磁性编码器 | |||||||||||||||||||||
| TJW46FA Series | |||||||||||||||||||||
| Dimensional drawing 外形尺寸图(mm) | |||||||||||||||||||||
![]() | |||||||||||||||||||||
| Picture of motor 电机实物图 | |||||||||||||||||||||
![]() | |||||||||||||||||||||
| Motor characteristics 电机特性 | |||||||||||||||||||||
| Housing material 安装面材质 | Zinc alloy 锌合金 | ||||||||||||||||||||
| Gear chain material 齿轮材质 | Powder metallurgy 粉末冶金 | ||||||||||||||||||||
| Back lash 齿轮背隙 | ≤2° | ||||||||||||||||||||
| Bearings on output shaft 输出轴轴承 | Oil bearing 含油轴承 | ||||||||||||||||||||
| Recommended max input speed 建议最大输入转速 | ≤12000RPM | ||||||||||||||||||||
| Radial force 径向力 | ≤1kgf | ||||||||||||||||||||
| Axial force 轴向力 | ≤0.7kgf | ||||||||||||||||||||
| Maximum pressure force on shaft 主轴最大承受压入力 | ≤10kgf | ||||||||||||||||||||
| Radial clearance 径向间隙 | ≤0.05mm | ||||||||||||||||||||
| Axial clearance 轴向间隙 | ≤0.3mm | ||||||||||||||||||||
| Operating temperature range 使用温度范围 | -20℃-120℃ | ||||||||||||||||||||
| Commutator 换向结构 | Brushed | ||||||||||||||||||||
| Direction of rotation 旋转方向 | CW / CCW | ||||||||||||||||||||
| Noise 噪音 | ≤40dB | ||||||||||||||||||||
| DC Motor Technical Data 直流电机参数 | |||||||||||||||||||||
| Values at 25-30℃ 室温下测量数值 | |||||||||||||||||||||
|
Model 型号 |
Rated Voltage(V) 额定电压 |
No-Load 空载参数 |
Rated 额定参数 |
Stall 堵转参数 |
*Tips: The datasheet on left side are limited, please consult our staffs for more parameter information. 提示:左边的数据表参数有限,请联系客服获取更多参数信息。 |
||||||||||||||||
|
Speed 转速 |
Current 电流 |
Speed 转速 |
Current 电流 |
Torque 力矩 |
Output 输出功 |
Eff 效率 |
Torque 力矩 |
Current 电流 |
|||||||||||||
| rpm | mA | rpm | A | mN.m | W | % | mN.m | A | |||||||||||||
| RF370 | 6 | 6500 | 70 | 5200 | 0.23 | 1.58 | 0.86 | 62.34 | 4.74 | 1.50 | |||||||||||
| RF370 | 12 | 6500 | 30 | 5200 | 0.12 | 1.72 | 0.94 | 62.86 | 5.16 | 0.95 | |||||||||||
| Motor With Gearbox Technical Data 减速电机参数 | |||||||||||||||||||||
| Gearbox data 减速箱参数 | |||||||||||||||||||||
|
Gear ratio 减速比 n : 1 |
40 | 69 | 100 | 180 | 255 | 330 | 950 | 1170 | 1450 | 1650 | 5300 | ||||||||||
|
Number of gear stages 减速级数 |
2 | 2 | 2 | 3 | 3 | 3 | 4 | 4 | 5 | 6 | 6 | ||||||||||
|
Gearbox size 齿轮箱尺寸(mm) |
46*32 | 46*32 | 46*32 | 46*32 | 46*32 | 46*32 | 46*32 | 46*32 | 46*32 | 46*32 | 46*32 | ||||||||||
|
Efficiency 效率(%) |
0.72 | 0.72 | 0.72 | 0.61 | 0.61 | 0.61 | 0.52 | 0.52 | 0.44 | 0.38 | 0.38 | ||||||||||
| RF370-6V-6500R | |||||||||||||||||||||
|
No-load speed 空载转速(RPM) |
162.5 | 94.2 | 65.0 | 36.1 | 25.5 | 19.7 | 6.8 | 5.6 | 4.5 | 3.9 | 1.2 | ||||||||||
|
Rated speed 额定转速(RPM) |
130.0 | 75.4 | 52.0 | 28.9 | 20.4 | 15.8 | 5.5 | 4.4 | 3.6 | 3.2 | 1.0 | ||||||||||
|
Rated torque 额定扭矩(N.M) |
0.046 | 0.079 | 0.114 | 0.175 | 0.247 | 0.320 | 0.784 | 0.965 | 1.000 | 0.983 | 1.000 | ||||||||||
|
Rated torque 额定扭矩(KG.CM) |
0.45 | 0.77 | 1.12 | 1.71 | 2.42 | 3.14 | 7.68 | 9.46 | 9.80 | 9.64 | 9.80 | ||||||||||
|
Rated torque 额定扭矩(LB.IN) |
0.52 | 0.89 | 1.29 | 1.97 | 2.79 | 3.62 | 8.85 | 10.90 | 11.29 | 11.10 | 11.29 | ||||||||||
| RF370-12V-6500R | |||||||||||||||||||||
|
No-load speed 空载转速(RPM) |
162.5 | 94.2 | 65.0 | 36.1 | 25.5 | 19.7 | 6.8 | 5.6 | 4.5 | 3.9 | 1.2 | ||||||||||
|
Rated speed 额定转速(RPM) |
130.0 | 75.4 | 52.0 | 28.9 | 20.4 | 15.8 | 5.5 | 4.4 | 3.6 | 3.2 | 1.0 | ||||||||||
|
Rated torque 额定扭矩(N.M) |
0.050 | 0.086 | 0.124 | 0.190 | 0.269 | 0.349 | 0.853 | 1.000 | 1.000 | 1.000 | 1.000 | ||||||||||
|
Rated torque 额定扭矩(KG.CM) |
0.49 | 0.84 | 1.22 | 1.86 | 2.64 | 3.42 | 8.36 | 9.80 | 9.80 | 9.80 | 9.80 | ||||||||||
|
Rated torque 额定扭矩(LB.IN) |
0.56 | 0.97 | 1.40 | 2.15 | 3.04 | 3.94 | 9.63 | 11.29 | 11.29 | 11.29 | 11.29 | ||||||||||
| Gear motor curve case 减速电机曲线示例 | |||||||||||||||||||||
| Project 工程名: | DC GEAR MOTOR | Date 日期: | 2025/3/26 | Performance (in an ambient temperature of 25-30℃) | |||||||||||||||||
| Motor speed转速: | 6500RPM | Full scale 量程: | 100% | Eff | Rapidly test to prevent temperature rise and overload damage. | ||||||||||||||||
| Gear chain 级数: | 4 | 1.0 | Watts | Constant voltage 恒压加载: | 12 | Volts | |||||||||||||||
| Gear ratio 减速比: | 1170 | 1.0 | Amp. | Direction 方向: | CW/CCW | ||||||||||||||||
![]() |
At no-load 空载参数 | ||||||||||||||||||||
| Speed 转速: | 5.6 | RPM | |||||||||||||||||||
| Current电流: | 0.030 | AMPS | |||||||||||||||||||
| Max instantaneous parameters 最大瞬时参数 | |||||||||||||||||||||
| Torque 扭矩 : | 4610.9 | mN-m | |||||||||||||||||||
| Current 电流: | 0.405 | AMPS | |||||||||||||||||||
| At maximum efficiency 最高效率点参数 | |||||||||||||||||||||
| Efficiency 效率 : | 34.8 | % | |||||||||||||||||||
| Torque 扭矩 : | 1005.46 | mN-m | |||||||||||||||||||
| Speed 转速 : | 4.4 | RPM | |||||||||||||||||||
| Current 电流: | 0.110 | AMPS | |||||||||||||||||||
| Output 输出功率: | 0.46 | Watts | |||||||||||||||||||
| At maximum power output 最大功率输出参数 | |||||||||||||||||||||
| Output 输出功率 : | 0.683 | Watts | |||||||||||||||||||
| Torque 扭矩 : | 2349.9 | mN-m | |||||||||||||||||||
| Speed 转速 : | 2.8 | RPM | |||||||||||||||||||
| Current 电流 : | 0.22 | AMPS | |||||||||||||||||||
| Production Combination 其他配件 | |||||||||||||||||||||
| Accessories 名称 | Voltage 电压 | Resolution 分辨率 | Channels 通道数 | Remark | |||||||||||||||||
| Magnetic Encoder 磁性编码器 | 5V-24V | 12ppr | A&B | ||||||||||||||||||
Compact Worm Gear Motor | TJW46FA | High Reduction Ratio & Self-Locking Capability
1. 46mm center distance, compact right-angle design for space-limited installations
2. Output torque up to 1.5Nm, reduction ratio range 5:1 to 80:1
3. Built-in self-locking feature prevents reverse rotation (depending on ratio)
4. Low noise operation with smooth motion transmission
TJW46FA is a compact worm gear motor featuring 46mm center distance and right-angle output design. The worm and worm wheel configuration provides high reduction ratios in a single stage while maintaining a small footprint. The self-locking characteristic (available at certain ratios) prevents back-driving, making it ideal for hoisting and holding applications. The gear housing is made of die-cast aluminum for good heat dissipation and structural rigidity. We provide optional motors such as brushed DC motors, brushless DC motors, and stepper motors, which can be matched with the TJW46FA worm gearbox for various speed and torque requirements.
Center distance 46mm, reduction ratio 5–80:1, output torque up to 1.5Nm, input power up to 60W, self-locking available on ratios ≥30:1.
- Electric hospital beds and patient lifts
- Automatic sliding doors
- Solar tracking systems
- Office adjustable desks
- Small conveyor systems
- Vending machine mechanisms
1. Right-angle compact design: Saves installation space compared to inline gearboxes.
2. Self-locking function: Prevents reverse rotation for safety-critical applications.
3. Quiet operation: Worm gear meshing provides smooth and low-noise transmission.
4. High reduction in single stage: Up to 80:1 without multiple stages.